The BD505LF uses digital noise reduction technology to ensure a clear communication clearly even in a noisy environment. Support dual time slot communication, saving frequency resources; Mathematical model compatibility, improve the utilization rate of customer resources; The quality of military industry meets the requirements of complex communication environment.
asking for a demo| Frequency Range | UHF:446 MHz |
| Channel Capacity | 16 |
| Zone Capacity | 1 |
| Channel Spacing | 25/12.5KHz |
| Operating Voltage | 7.4 |
| Battery | 1500mAh (Li-ion) |
|
Battey Life(5/5/90 Duty Cycle,High TX Power)
|
Analog?>12hours |
| Digital?>16hours | |
| Frequency Stability | ±0.5ppm |
| Antenna Impedance | 50? |
| Dimensions(H×W×D) mm | 108*54.5*28 |
| Weight | 240g(with BL1506 and antenna) |
| RF Power Output | 0.5W |
| FM Modulation | 11K0F3E @ 12.5KHz |
|
4FSK Digital Modulation
|
12.5KHz Data Only:7K60FXD |
| 12.5KHz Data&Voice:7K60FXW | |
|
Conducted/Radiated Emission
|
-36dBm < 1GHz |
| -30dBm > 1GHz | |
| Modulation Limiting | ±2.5KHz @ 12.5KHz |
| FM Hum&Noise | 40dB @ 12.5KHz |
| Adjacent Channel Power | 60dB @ 12.5KHz |
| Audio Response | +1~-3dB |
| Audio Distortion | ?3% |
| Digital Vocoder Type | AMBE+2™ |
| Digital Protocol | ETSI-TS102 361-1,-2,-3 |
|
Sensitivity(Analog)
|
Spec:< 0.28uV(-118dBm) |
| Typical:< 0.22uV | |
|
Sensitivity(Digital)
|
Normal:-110dBm/BER1% |
| Extreme:-116dBm/BER5% | |
| Adjacent Channel Selectivity | ETSI:60dB @ 12.5 KHz |
| Spurious Response Rejection | ETSI:70dB @ 12.5 KHz |
| Intermodulation | ETSI:65dB @ 12.5 KHz |
| Hum&Noise | 40dB @ 12.5KHz |
| Blocking | ETSI:84dB |
| Rated Audio Power Output | 0.5W |
| Rated Audio Distortion | ?3% |
| Audio Response | +1~-3dB |
|
Conducted Spurious Emission
|
< -57dBm@< 1GHz |
| < -47dBm@> 1GHz |
| Operating Temperature | -30?~+60? |
| Storage Temperature | -40?~+85? |
|
ESD
|
IEC 61000-4-2(level 4) |
| ±8kV(Contact) | |
| ±15kV(Air) |
| MIL Standard | MIL-STD-810 G |
| Humidity | Per MIL-STD-810 G Standard |
| Dust & Water Protection | IP54 standard |
| Shock & Vibration | Per MIL-STD-810 G Standard |